During the use of internal combustion forklifts, there may be some problems to some extent. So what should be paid attention to when using internal combustion forklifts in this hot season? Below, hifoune forklift manufacturers will explain to you what should be noted for internal combustion forklifts under high temperatures?
1. Before entering the heatstroke prevention holiday, prepare in advance. If necessary, release winter lubricating grease from the diesel internal combustion forklift engine, drive, gearbox, steering gear, etc. After cleaning, add summer lubricating grease according to regulations.
2. Immediately clean the dirt from the refrigeration system and inspect the radiator of the heat pipe radiator. Regularly check the tightness of the engine belt.
3. During the operation of diesel internal combustion forklifts, pay attention to preventing the engine from overheating, and pay attention to the indicated reading value of the coolant temperature gauge anytime and anywhere.
4. Regularly check the temperature and standard air pressure of the tires, and if necessary, park in a cool place. Wait for the tire temperature to decrease before operating again. Do not use methods such as releasing air or pouring cold water to reduce pressure and temperature, which can easily reduce the lifespan of the tires.
5. Adjust the relative density of the lithium battery electrolyte and connect it to the ventilation port on the battery cover. Add purified water as needed.
6. Para evitar aplicaciones de alta frecuencia, se sugiere detener el automóvil después de 4 a 6 horas de uso continuo, y la aplicación debe realizarse en un lugar fresco después de aproximadamente 45 minutos de enfriamiento.
7. Cuando la temperatura es de tormenta en verano, no es necesario operar al aire libre en días lluviosos en la medida de lo posible.
8. Antes de operar montacargas diesel de combustión interna, es necesario asegurar suficiente energía. Si se siente aburrido, mareado o lento durante la operación, debe detenerse y descansar de inmediato, o usar agua fría para limpiarse la cara y aumentar su energía para garantizar operaciones de conducción estables.